Prevent these by giving your gas stove wipe down every day, and a deep clean at least once every two weeks, depending on how often you cook. Here’s a guide on how to clean a gas stove, from gas burner, pan support, to all kinds of surfaces.
Step 1: Prepare all necessary cleaning materials
The first step to any cleaning project is to get all necessary items. When it comes to cleaning your gas stove, you can rest assured that all the cleaning materials are probably already in your home.
Here is the list of supplies you will need for your cleaning:
- Mild dish soap
- Baking soda
- Medium-stiffness scrub brush
- An old toothbrush
- A soft, dry cloth
- Non-abrasive scrub pad
Step2: Turn off gas burner
Before cleaning your gas appliance, make sure that the surfaces are completely cool, and the control knobs are switched to the off position. You’re going to be removing the burner guards and scrubbing the knobs, so it’s essential that the gas does not come on while you’re working.
Step 3: Read manufacturer’s instruction
Knowing what kind of care is the best for your appliances will go a long way in protecting your investment. The product manual that comes with your gas stove will help you know which areas are safe to remove for cleaning. If you cannot find the printed user manuals, check out Electrolux India site!
Step 4: Safely remove the burners
Whether you have burner caps, grates, or coils, to clean them efficiently, it is necessary to take them off the stove first. Make sure to turn off the valve on your gas cylinder before you begin for safety reasons. Furthermore, allow your burners to cool down completely if they’ve been used earlier.
Step 5: Clean gas stove pan supports in warm soap water
When your gas stove is cool, easily lift the trivets and hand-wash them in warm soapy water using a non-abrasive cloth or sponge. Then, you can use a non-metallic brush or the stove cleaner to remove stubborn stains, or soak the pan supports in the warm soapy water in 20 minutes.
Since they’re cast iron, dry them immediately to prevent rust. After wiping with a soft cloth, carefully place them back on your stove and turn the heat on for a few seconds to dry them.
Step 6: Clean gas stove burners
Cleaning gas stove burners caps and heads is an important step
Burner caps and heads can also be hand-washed with small cloth or unused tooth brusher. For those with burnt-on spills, soak them in warm soapy water to soften the soils. If messes have high sugar or acid content, clean them immediately, otherwise they may leave dull spots. Also, a baking soda and water paste may help clean marks that are extra-stubborn.
To ensure clog-free cooking, you should clean the spark plug and flame safety device with a moist cloth. And don’t forget to make sure the burners are fully dried before returning them.
>> Read more: Frequently asked questions about Electrolux stoves
Step 7: Wash gas stove surfaces
Clean the steel surfaces
Stainless steel requires special clean to maintain its finish and durability
Stainless steel requires special care to maintain its finish and durability. So, when in doubt, you can spot test first or refer to your gas stove’s user manual.
Your best bet to clean stainless steel is a specialty cleaner to dissolve grease and make your stove shine like new again. If they’re unavailable, you can use warm soapy water, rinse, then buff with a microfiber cloth.
To prevent stains and streaks, remember to always wipe in the direction of the grain, buff thoroughly instead of air drying, and avoid abrasive or acidic materials.
Clean glass or ceramic surfaces
Going gentle is the key in preventing micro-scratches in glass or ceramic surfaces. You should use a glass cleaning spray or cream which is specially formulated to protect your stove. Using this, wipe the surface with a microfiber cloth, going in circular motions, then buff dry. For burnt-on residue, you can use a ceramic scraper.
Going gentle is the key in preventing micro-scratches in glass or ceramic surfaces
Cleaning your stove can be hassle-free if you prevent big messes in the first place. Save yourself the time and effort by routinely wiping spills after every cooking session, getting some splatter guards, or covering the pan when frying. Your future self will thank you for this gas stove thorough cleaning.
How to clean gas stove: FAQs
What are the major steps in cleaning gas stove
Follow these following steps on how to clean gas stove:
- Safely remove the burners
- Lift the trivets and hand-wash them in warm soapy water, using a cloth
- Use baking soda with a cloth or tooth brusher to clean the burners
- Wipe the gas stove surface
How often should you clean gas stove?
It’s advised that you wipe down your gas range top after every use, carefully cleaning up crumbs and spills. Then, every two weeks (or whenever you notice an unpleasant appearance), perform a deeper cleaning.
Can we use lemon to clean gas stove?
Yes, you can use DIY materials like lemon to clean a gas stove. Prepare a mixture of lemon juice, water, and baking soda. Apply the mixture to spills, let sit for 15 minutes, then scrub and rinse with water and a sponge.
- SenseFry adjusts heat for even frying results.
- Select the bridge function to combine two zones.
- PowerBoost provides quick, intense heat.